Skip to content

Hanahan · North Charleston · Goose Creek · Charleston

Careful window and gutter cleaning. Get your quote at (843) 418-9043

(843) 418-9043
Worker in a cap brushing a removed window screen leaned against a brick house wall, with a row of screens beside it on a wet driveway and a ladder nearby

ServicesScreen Cleaning & Repair

Window Screen Cleaning & Repair in Hanahan

We take your screens down, wash out the pollen and grime, and fix torn or sagging ones by rescreening the frames you already have. We explain your mesh choices in plain terms, so what goes back up suits how your family actually uses each window.

Screens that let the breeze in and keep the bugs out

Screens do a quiet job until they stop doing it. A dirty screen makes a freshly cleaned window look dull from inside, and a small tear turns into an open door for mosquitoes. We handle both problems: careful cleaning for screens that are only dirty, and rescreening for the ones that are torn, stretched or corroded.

Most of the value is in picking the right mesh. Standard fiberglass is soft, affordable and easy on the eyes, but it dents and tears more easily. Aluminum holds its shape and resists pets better, though it can crease and, near salt air, slowly turn chalky. Pet-resistant mesh is a heavier vinyl-coated polyester that shrugs off claws. Solar mesh cuts heat and glare on sunny sides of the house at the cost of a little visibility.

We will show you samples, tell you honestly where each one makes sense, and often suggest keeping plain fiberglass on most windows and using a tougher mesh only where it earns its keep.

What our screen work covers

Hand washing

Each screen comes down and gets a soft brush and mild soap on both sides, then a gentle rinse. No pressure washer, which can stretch mesh and pop spline out of its channel.

Rescreening torn or sagging mesh

We pull the old mesh and spline, fit new mesh in the existing frame, and roll it in so it sits flat and taut. A good rescreen looks like a new screen without the cost of a new frame.

Mesh options explained

Fiberglass, aluminum, pet-resistant and solar mesh each behave differently. We match the mesh to the window, such as a sliding door the dog uses or a west-facing bedroom that gets the afternoon sun.

Spline and hardware check

Dried-out spline is a common reason mesh comes loose, so we replace it with the right diameter for your frame channel. We also look at pull tabs, tension springs and corner keys.

Frame assessment

Lightly bent frames can often be straightened. If one is too far gone to hold mesh properly, we tell you before doing any work on it.

Labeled reinstall

Screens are marked by window as they come down, so each one goes back where it fits best.

Signs your screens are due for attention

  • A gray or yellow haze

    Pollen, dust and cobweb residue collect in the mesh. If the view looks foggy even after the glass is clean, the screen is the culprit.

  • Holes and tears

    Even a pinhole lets in gnats and mosquitoes on humid evenings. Small tears also tend to run once the mesh around them loosens.

  • Sagging or bulging mesh

    Mesh that has been pushed by pets, kids or wind loses tension and will not tighten back up. Rescreening is the fix.

  • Spline creeping out

    When the rubber cord along the edge looks cracked or is lifting out of the groove, the mesh is about to let go.

  • White, chalky aluminum

    Aluminum mesh that has oxidized feels rough and sheds a powder. It is weaker than it looks and usually worth replacing.

  • Rattling or falling out

    Screens that shift in the wind or drop out of the opening often need new springs, tabs or a frame adjustment.

How a screen visit goes

  1. 1

    A quick phone conversation

    You tell us how many screens you have, which ones are torn, and whether pets or sun are an issue. We give you a quote by phone and settle on a time that works.

  2. 2

    Removal and labeling

    We take the screens down from the outside, mark each one, and lay them on a clean surface away from your plants and paint.

  3. 3

    Cleaning and repair

    Dirty screens get washed and air dried. Damaged ones are rescreened with the mesh you picked, and spline and hardware are swapped where needed.

  4. 4

    Reinstall and walk-through

    Every screen goes back into its opening and is checked for a snug fit. We walk you around, point out anything we noticed, and leave the work area tidy.

What moves the price of screen work

Screen work is priced by what your screens actually need, not a flat guess. Cleaning alone costs less than rescreening, and the mesh you choose matters. We walk you through the numbers on the phone so the quote matches the job.

Number and size of screens
A handful of standard window screens is a different job than a large sliding door screen or a whole house of them.
Mesh type
Fiberglass is the most economical. Aluminum, pet-resistant and solar mesh cost more in material and can take a little longer to install.
Frame condition
Straight, sound frames rescreen quickly. Bent corners, broken corner keys or missing hardware add time and parts.
Upper-story access
Screens on second-floor windows take more ladder work and care to remove and reinstall.
Pairing with other work
Many customers have screens done alongside residential window cleaning or window track and sill cleaning, since everything is already open and accessible.

Screen cleaning and repair questions

Something not covered here? (843) 418-9043

Can a small hole be patched instead of rescreening the whole screen?

Sometimes, for a tiny hole in a screen you rarely look through. Patches are visible though, and the mesh around a tear is often already weak. On most screens a full rescreen looks better and lasts longer, and we will tell you which makes sense for yours.

Which mesh holds up best with dogs and cats?

Pet-resistant mesh, a thick vinyl-coated polyester, handles claws and paws far better than fiberglass or aluminum. It is a bit darker to look through, so we usually suggest it only on the doors and low windows your pets actually use.

Is aluminum mesh a good idea near the coast?

Aluminum is stiff and durable, but salt air can make it oxidize and go chalky over time. Closer to the water, fiberglass or a coated mesh tends to age more gracefully. We can show you both so you can compare the look.

Do I need to be home while you work?

Not necessarily. Since we remove screens from the outside, many visits can happen without you there, as long as gates are open and pets are inside. We do like a quick chat at the start or end to go over what we found.

How often should screens be cleaned?

For most homes, once or twice a year keeps them clear. After heavy spring pollen is a good time, and cleaning screens at the same visit as the windows keeps dirt from washing back onto clean glass.

Clear, snug screens back in every window

Give us a rough count of your screens and let us know which ones are torn, sagging or just dusty. We will walk you through the mesh choices that fit each window and give you a straightforward quote on the call.